| GIS Addressing | Resolved | The parcel needs to be separated into three lots by way of subdivision with City Planning. |
| Zoning | Resolved | Permit Intake - Please provide an approved and recorded subdivision survey, verifying the lot(s) of the proposal. You may apply for an official subdivision at https://nola.gov/onestop/building/planning-project/major-or-minor-subdivision/development. |
| Zoning | Resolved | Please identify how the required parking will be accommodated. A C-STR requires one parking space per each two bedrooms (3 parking spaces are required for this proposal)- - Alternatively, if a hardship exists, you may seek a variance from the Board of Zoning Adjustments. Contact CPC for more information at cpcinfo@nola.gov or 504-658-7033. For application materials and approval criteria please see this link: https://www.nola.gov/onestop/building/planning-project/variances/ |
| Plan Review | Resolved | PLAN REVIEW
This project has been reviewed by Sr. Building Plan Examiner, Warren E. Jones, PE. For email correspondence, please send to warren.jones@nola.gov or call (504) 658-7121. |
| Plan Review | Resolved | PLAN REVIEW
GENERAL NOTE:
Check the status of a permit or license at https://onestopapp.nola.gov/
|
| Plan Review | Resolved | PLAN REVIEW
GENERAL NOTE:
1. You can upload documents and written responses to review comments to the OneStop website.
2. For assistance uploading files, go to https://nola.gov/onestop/help-with-the-one-stop-app/monitoring-and-udating-permits/ and select FAQ “Can I add documents after my application is submitted?”
3. Do NOT mix construction plans with letters or other text documents; upload as separate PDF files.
4. Combine multiple plan sheets into a single PDF file.
5. All written responses to review comments must be on letterhead and signed and sealed by the design professional of record (if applicable.)
6. If you upload any documents to OneStop, please notify your plan reviewer by email.
|
| Plan Review | Resolved | PLAN REVIEW
GENERAL NOTE:
Unless noted otherwise, all review comments and citations reference the 2015 International Building Code (“2015 IBC”) and City of New Orleans Amendments to the 2015 IBC, including all relevant subsections.
|
| Plan Review | Resolved | PLAN REVIEW
Please submit a signed contract or cost estimate with labor and material breakdown, and a copy of the contractor’s license certificate. The estimate or contract should:
a) detail all costs including materials, labor, general conditions, contractor overhead and profit; and
b) be written on business letterhead, dated, and stating the correct permit number, project address, contractor license number(s) and contact information including phone number
All contracts or cost estimates shall include both the Contractor and Owner SIGNATURES, PRINTED NAMES, TITLES , AND DATE.
|
| Plan Review | Resolved | PLAN REVIEW
A benchmark or elevation certificate is required for this project. Benchmark certificates must bear the live seal of a Louisiana registered surveyor, and must be dated within the last six (6) months. The certificate must be on the Safety & Permits three-part form dated 09/30/16. |
| Plan Review | Withdrawn | PLAN REVIEW
Approval from the State Fire Marshal is required. Apply online at http://sfm.dps.louisiana.gov/ or contact the State Fire Marshal’s office at 1450 Poydras Street, Suite 1500, New Orleans, LA 70112, Ph. (504) 568-8511 or 8181 Independence Boulevard, Baton Rouge, LA 70806, Ph. (225) 925-4920 / 800-256-5452. |
| Plan Review | Resolved | PLAN REVIEW
New or renovated driveways, sidewalks or curb cuts (including patches and repairs), require approval from the Department of Public Works. Site plan indicating location of the planned improvements must be submitted to DPW.
(Note: Depending on address and other details of your work, you may also need additional approvals (e.g. Vieux Carre Commission, Parks and Parkways etc.) to comply with all applicable City codes and regulations.)
For more information including a DPW driveway/curb cut permit application, fee schedule and sample standard drawing, go to https://www.nola.gov/onestop/building/street/driveway-sidewalk-cut-permit or contact DPW at (504) 658-8040 or call Mr. Kevin Giroir, PE (DPW) at kggiroir@nola.gov / (504) 658-8006
|
| Plan Review | Resolved | PLAN REVIEW
Zoning, Floodplain Administration and S&P (Intake) reviews are pending. Additional review comments from those divisions may be forthcoming. |
| Plan Review | Resolved | The property is located in a HDLC full control district. Any exterior work will require approval from HDLC (504) 658-7040. For questions or additional detail, please contact HDLC Bldg. Plan Examiner, Chase Klugh @ chase.klugh@nola.gov |
| Plan Review | Resolved | PLAN REVIEW
Approval from the Sewerage and Water Board is required. Submit plumbing riser diagram (incl. a copy of the floor plan; fixture schedule & counts; and (where applicable) grease or other trap information incl. sizes and locations), directly to Sewerage and Water Board (504-585-2160/ hblancq@swbno.org/jarnold@swbno.org.)
Upon approval, notify plan reviewer and provide a copy of the SWBNO-stamped, approved riser diagram to this office.
|
| Stormwater Review | Open | Confirm relationship of this permit to adjacent permits in order to determine extent of Development Site for this commercial project. |
| Stormwater Review | Open | Comments in response to information received as of 02/24/2022; REVISIONS NEEDED
Submit a complete Stormwater Management Plan [SWMP] with all required submittals per City Code Section 26-15. I.B.C.- Amendments, Chapter 1, Section 121-Stormwater. 121.8 Post-Construction.
A stormwater management plan is required in any of the following circumstances; and shall apply to the entire Development Site:
1. New construction of five thousand (5,000) or more square feet of impervious surface on a development site; or
2. Substantial improvement of a site with five thousand (5,000) or more square feet of impervious surface on a currently developed site; or
3. Any site of one (1) acre or more in size; or
4. Any site where the principal use is stormwater management; or
5. A stormwater plan shall be required for any addition or replacement of impervious surface which results in five thousand (5,000) or more square feet of impervious surface on a development site.
Additionally, for all permits filed after 09/16/19, the stall portion of all non-ADA parking spaces shall be designed using permeable pavement with 24" of aggregate base. This may or may not be a part of a required Stormwater Management Plan. |
| Permit Intake | Resolved | Permit Intake - Please submit a signed contract. Contract must include the full description of all work being done, material, labor and cost, both the contractor and owner signature(s), printed name(s), titles, and date. |
| Permit Intake | Resolved | Permit Intake - Please provide a Detailed Cost Estimate that includes a scope of work, break down of all costs (materials and labor) including any required sub-permit work for mechanical and/or electrical. The estimate needs to be an exact amount and match the total contract amount. Signature(s), printed name(s), title(s), and date, are required on estimate. |
| Permit Intake | Resolved | Permit Intake - Please submit a plumbing riser diagram approved by Sewerage & Water Board. |
| Permit Intake | Resolved | Permit Intake - A Benchmark Certificate is required for this permit application. The Benchmark Certificate must bear the live seal of a Louisiana registered land surveyor and dated within the last six (6) months. This must be on the Safety & Permits three-part form. |
| Public Works - Traffic | Resolved | Awaiting confirmation of apron location in relation to tree / utility pole / storm drain |
| Public Works - Traffic | Resolved | Driveway apron location shown on " 3513 Chartres_HDLC_approved.pdf" approved provided all Zoning and Parks & Parkways requirements have been met. Applicant is fully responsible for ensuring compliance with all Zoning requirements, and for ensuring that Parks & Parkways has given approval for all work with the potential to negatively impact a City tree. Driveway must conform to all City standards, and must not negatively impact drainage. Any conflict with existing utilities, trees, or other obstructions must be resolved with appropriate entities to ensure a minimum separation between utility and apron of 18 inches, and/or any other clearance requirement as required. Conflicts with any RTA route must be resolved with RTA. This resolution must occur prior to any work, and this approval is contingent on the resolution (i.e., if any entity has an unresolvable conflict, this approval is void). Any storm drain within apron area must be converted to drop inlet. Driveway / Curb Cut permit application with site plan showing proper apron as per City standards must be submitted prior to installation. Any storm drain conversion or other subsurface utility work requires a separate Utility/Service Cut permit (also referred to as a Street Cut permit). Any sidewalk work outside of the panels within and immediately adjacent to driveway aprons requires a separate Sidewalk Repair permit. Work subject to Section 146-448 of the Municipal Code as applicable. Note: Truncated domes shown on DPW standard drawings are not required unless specifically stated on the stipulations of the Driveway / Curb Cut permit. |